Actron PocketScan Plus CP9550 Manual do Utilizador descarregar pdf (Página 10)

NOTICE

TheVINfunctionisnotsupportedbyallvehicles.

Troubleshooting

 If a “LINK ERROR” message appears while performing the

Read operation, cycle the ignition key to the OFF position

for 10 seconds, then back ON, then press the READ key.

Make sure the ignition key is in the ON not the ACCESSORY

position.

 If a “LINK ERROR” message appears while performing the

Erase function, cycle the ignition key to the OFF position for

10 seconds, then back ON, then press one of the following

while the ignition key is in the ON not the ACCESSORY

position:

• To continue erasing, press the ERASE key. A Diagnostic

Trouble Code will return if the problem causing the

DiagnosticTroubleCodehasnotbeenxed.

• To cancel the Erase function, and read codes, press the

 READ key.

• To cancel the Erase function and return to the Main Menu,

press the

ENTER key.

 If the MIL Status is ON and the MIL is not illuminated with the

engine running, then a problem exists in the MIL circuit.

1 2 ... 5 6 7 8 9 10 11 12

Sem comentários

Actron PocketScan Plus CP9550 Manual do Utilizador Página 10